Our website is currently undergoing upgrading maintenance. We apologize for the inconveniences caused and will bring the new website to serve you better on 28 Nov 2018. Due to the upgrading works, the function – “Find a Distributor” and “Contact Us” page are currently not available. To locate our distributor or to make an inquiry, please call us at +603-6038 9498/97.
Saint-Gobain Weber Malaysia Shall ensure that the collection, use and Disclosure of your personal data is consistent with the Malaysia Personal Data Protection Act 2010 ("PDPA') and the relevant Privacy Laws in place in each jurisdiction that Saint-Gobain Weber Malaysia operates in. It is acknowledge that personal data collected and processed is obtained voluntarily and with your consent, please read our Company's Privacy Policy

Weber Saint-Gobain - Official website of the company



Product benefits

Acrylic-resin, Clear (Translucent) or cloudy (hazy) liquid, solvent-based sealer.

•Seals & protect against staining or discoloration
•Minimize the appreatance of efflorence on both surfaces & joints.
•Protects trated surface from weathering.
•Prevents surface dusting; therefore eases maintenance and
  preservation of substrate.
•Easy to apply using brush, cloth or roller.

Product Features

Technical Data

•Application Temperature : 5-30⁰C
•Touch dry time : 2 - 4 hours
•Cure Time : 24 hours
•Flash Point (ASTM D56) : 28⁰C
•Density : Gloss - 0.88kg / ltr Matt - 0.88kg / ltr


Printable Product Document (PDF)

Technical Data Sheet

Material Safety Data Sheet

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation & Application


•Stir BELCEM SUPER SEAL well, before use. No further dilution is required.
•Surface must be dry, sound, flat/true & free of contaminants.
•Apply evenly with a brush or roller, ensure thin even coats are applied.
•Applied as a single coat treatment. 
 Certain materials may require two coats of sealing for better result.
•Should a second coat is required, allow first coat to touch dry
 within 2-4 hours.
•The second coat must be applied wet on wet; 
 before first coat dries out or fully cure.
•Preliminary testing on small trial areas is important to determine coverage
 and compatibility if BELLE SUPER SEAL with the  materials to be treated.
•Do not apply on damp or wet surfaces. Avoid application during 
 wet weather conditions & onto materials that are extremely hot.
•Allow to cure for 24 hours before subjected to light traffic.

Self Life & Storage

•12 months after manufacturing date when stored unopened in dry condition of normal ambient temperature.


Depending on porosity of material to be sealed :   

Low water absorption (< 5%)                  = 1 - 2 ltrs / 100 m²
Moderate water absorption (20-30%)      = 8 - 12 ltrs / 100 m²
High water absorption (35-50%)              = 20 - 25 ltrs / 100 m²


 Available in 1, 5 & 20 ltr steel container. 


1,5 & 20 Ltrs