Our website is currently undergoing upgrading maintenance. We apologize for the inconveniences caused and will bring the new website to serve you better on 28 Nov 2018. Due to the upgrading works, the function – “Find a Distributor” and “Contact Us” page are currently not available. To locate our distributor or to make an inquiry, please call us at +603-6038 9498/97.
Saint-Gobain Weber Malaysia Shall ensure that the collection, use and Disclosure of your personal data is consistent with the Malaysia Personal Data Protection Act 2010 ("PDPA') and the relevant Privacy Laws in place in each jurisdiction that Saint-Gobain Weber Malaysia operates in. It is acknowledge that personal data collected and processed is obtained voluntarily and with your consent, please read our Company's Privacy Policy

Weber Saint-Gobain - Official website of the company

BELCEM CRYSTAL GROUT

BELCEM CRYSTAL GROUT
BELCEM CRYSTAL GROUT

Product benefits

  • Water repellent and water droplet effect,reducing staining and allows for easier maintenance.

Multi colored, hydrophobic water repellent, compressible  Anti fungus, Improved cement based grout

 

  • Contains non-harmful special chemicals to provide resistance against growth of fungus, algae, and mould on grout surface; therefore more hygienic.
  • Minimize or eliminate grout cracking problem.
  • Enhance compressibility, durability & abrasion resistant properties. More resistant to selected cleaning agents.
  • Can be mixed with water to thicker (creamy) or softer (fluid) paste; therefore suitable for filling wide & narrow joints.
  • High quality pigments & chemical additives to provide grout with intense colour, longer lasting colour compared to traditional coloured grout.
  • Designed to provide a smooth or flat surface. Eliminate cavities & pinholes.



Product Features

Technical Data

•Application Temperature : Above 5⁰C at normal ambient temperature
•Working time (Pot Life) : 1.5 hours (Room Temperature)
•Setting Time : Initial Set - 4-6 hours Final Set - 18-24 hours
•Density : 1.80 kg/ltr
•Joint Width : 2 to 6 mm wide.
•Mix Proportion : Creamy Mix-1 part water to 3 pbw grout Fluid Mix-1 part water to 2.6 part grout

Documentation

Printable Product Document (PDF)

Technical Data Sheet

Material Safety Data Sheet

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation & Application

Application

Step 1
Step 2
Step 3
Step 4
Step 5
 

Step 1

• Allow adhesive bed to set 24 hours before grouting commences.

•Ensure that joints are dry, clean or free of contaminants.

Step 2

•Mix BELCEM CRYSTAL GROUT with clean water as per the recommended mix ratio

•Mechanical mixing is recommended to obtain a uniform coloured mortar. 

Ensure pigments are throughly dispersed during mixing.

Step 3

•Apply grout into joints using a grout float/rubber squeegee.

•Apply to a small areas at time

Step 4

•Clean excess or residue grout promptly using a damp cloth or sponge;before it dries out.

Step 5

•When grout is sufficient firm, polish tile surface with a clean dry cloth to remove grout film / haze.

•Allow grout to set for 24-48 hours 

 

 

Self Life & Storage

•6 months after manufacturing date when stored unopened in dry condition of normal ambient temperature.

Type of usage

• grouting or pointing between Porcelain,homegeneous, ceramic floor & wall tile, wet or dry area and interior or exterior areas.

Available in 1 kg bag.

packaging

1 kg

Coverage

Tile SizeJoint Width  Approx. Coverage
50 x 50 x 5.0mm     3mm1.00 kg / m²
108 x 108 x 8.0mm    3mm0.75 kg / m²
108 x 108 x 8.0mm    6mm 1.50 kg / m²
150 x 150 x 8.0mm    3mm0.54 kg / m²
150 x 150 x 8.0mm    6mm1.10 kg / m²
200 x 200 x 8.0mm    3mm0.41 kg / m²
200 x 200 x 8.0mm    6mm0.82 kg / m²
300 x 300 x 8.0mm    3mm0.27 kg / m²
300 x 300 x 8.0mm    6mm0.54 kg / m²
300 x 600 x 9.0mm    3mm0.23 kg / m2
300 x 600 x 9.0mm    6mm0.46 kg / m2
600 x 600 x 9.0mm    3mm0.15 kg / m2
600 x 600 x 9.0mm    6mm0.30 kg / m2