Our website is currently undergoing upgrading maintenance. We apologize for the inconveniences caused and will bring the new website to serve you better on 28 Nov 2018. Due to the upgrading works, the function – “Find a Distributor” and “Contact Us” page are currently not available. To locate our distributor or to make an inquiry, please call us at +603-6038 9498/97.
Saint-Gobain Weber Malaysia Shall ensure that the collection, use and Disclosure of your personal data is consistent with the Malaysia Personal Data Protection Act 2010 ("PDPA') and the relevant Privacy Laws in place in each jurisdiction that Saint-Gobain Weber Malaysia operates in. It is acknowledge that personal data collected and processed is obtained voluntarily and with your consent, please read our Company's Privacy Policy

Weber Saint-Gobain - Official website of the company

BELCEM ULTRA-PLUS GROUT

BELCEM ULTRA-PLUS GROUT
BELCEM ULTRA-PLUS GROUT

Product benefits

  • Suitable for grouting or pointing joints up to 3mm wide only. It will not scratch highly glazed ceramic tile surface.

Anti-Bacteria, Anti-Fungus, Multi colored, water resistant, compressible cement based unsanded color grout for floor and wall tile.

Product Features

Technical Data

•Application Temperature : Above 5⁰C - 50⁰C

•Working time (Pot Life) : 45 minutes

•Setting Time : 24 hours

•Density : 1.68 g/cm³

•Joint Width : up to 3 mm wide.

•Mix Proportion : 1 pbw water to 2.5 pbw grout (8 ltrs Water or Latex Admixture to 20kg BELCEM FINE GROUT)

Documentation

Printable Product Document (PDF)

Technical Data Sheet

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation & Application

Step 1
Step 2
Step 3
Step 4
Step 5

Application

Step 1

• Allow adhesive bed to set 24 hours before grouting commences.

•Ensure that joints are dry, clean or free of contaminants.

Step 2

•Mix BELCEM FINE GROUT with clean water (or BELCEM GT-MIX I) as per the recommended mix ratio

•Mechanical mixing is recommended to obtain a uniform coloured mortar. 

Ensure pigments are throughly dispersed during mixing.

Step 3

•Apply grout into joints using a grout float/rubber squeegee.

•Apply to a small areas at time

Step 4

•Clean excess or residue grout promptly using a damp cloth or sponge;before it dries out.

Step 5

•When grout is sufficient firm, polish tile surface with a clean dry cloth to remove grout film / haze.

•Allow grout to set for 24-48 hours

 

 

Type of Usage

BELCEM FINE GROUT + WATER :

Internal Dry Areas, Intermittent Wet Areas and Sound Substrate.

BELCEM FINE GROUT + BELCEM GT-MIX I :

• External Wall & Floor Areas.

•Wet Duty Areas eg. Communal & Domestic Showers, Toilets, Washroom, Wet Kitchen, Ablution etc.

•Areas or Substrate subjected to movement or deflection (eg.Building Boards etc).

•Heavy traffic floor areas.

•Swimming Pool & Pool Deck

packaging

20 kg