Our website is currently undergoing upgrading maintenance. We apologize for the inconveniences caused and will bring the new website to serve you better on 28 Nov 2018. Due to the upgrading works, the function – “Find a Distributor” and “Contact Us” page are currently not available. To locate our distributor or to make an inquiry, please call us at +603-6038 9498/97.
Saint-Gobain Weber Malaysia Shall ensure that the collection, use and Disclosure of your personal data is consistent with the Malaysia Personal Data Protection Act 2010 ("PDPA') and the relevant Privacy Laws in place in each jurisdiction that Saint-Gobain Weber Malaysia operates in. It is acknowledge that personal data collected and processed is obtained voluntarily and with your consent, please read our Company's Privacy Policy

Weber Saint-Gobain - Official website of the company

BELCEM F&W GROUT

BELCEM F&W GROUT
BELCEM F&W GROUT

Product benefits

  • Suitable for Porcelain,homegeneous, ceramic floor & wall tile,wet or dry area including swimming pool.
  • User-Friendly and good workability

Cement-Based Thin or Thick Bed Ceramic Tile & Stone Slab Coloured Grout 

Product Features

Technical Data

•Application Temperature : Above 5⁰C - 50⁰C
•Working time (Pot Life) : 45 minutes
•Setting Time : 24 hours
•Density : 1.70 g/cm³
•Joint Width : up to 12 mm wide.
•Mix Proportion : 1 pbw water to 3.3 pbw grout (6 ltrs Water or Latex Admixture  to 20kg BELCEM F&W GROUT)


Documentation

Printable Product Document (PDF)

Technical Data Sheet

Material Safety Data Sheet

Send or download the documentation

You can either send the documentation to en-email address, or download it.

Preparation & Application

step1
step2
step3
step4
step5

Application

1.Allow adhesive bed to set 
  24 hours before grouting 
  commences.


2.Ensure that joints are dry, 
  clean or free of contaminants.

3.Mix BELCEM F&W GROUT with 
  clean water (or BELCEM GT-MIX I) 
  as per the recommended mix ratio

4.Mechanical mixing is recommended 
  to obtain a uniform coloured mortar.
  Ensure pigments are throughly 
  dispersed during mixing.

5.Apply grout into joints using 
  a grout float/rubber squeegee.

6.Apply to a small areas at time.


7.Clean excess or residue grout 
  promptly using a damp cloth or 
  sponge;before it dries out.
 

8.When grout is sufficient firm, 
  polish tile surface with a clean 
 dry cloth to remove grout film / haze.

9.Allow grout to set for 24-48 hours.

Self Life & Storage

6 months after manufacturing date when stored unopened in dry condition of normal ambient temperature.

Type of usage

BELCEM F&W GROUT + WATER :
Internal Dry Areas, Intermittent Wet Areas and Sound Substrate.

BELCEM F&W GROUT + BELCEM GT-MIX I :
• External Wall & Floor Areas.
•Wet Duty Areas eg. Communal & Domestic Showers, Toilets, Washroom, Wet Kitchen, Ablution etc.
•Areas or Substrate subjected to movement or deflection (eg.Building Boards etc).
•Heavy traffic floor areas.
•Swimming Pool & Pool Deck

packaging

20 kg